The way to Install Android P Developer Preview 1 on Eligible Devices

  • Twitter
  • Facebook
  • Google+
  • Pinterest

Google just unveiled the primary Developer Preview build of Android P. It’ll often be a while before anyone can see it in working order, however, if you’re a Pixel/Pixel 2 owner, it is possible to skip before queue and look against eachother, currently. Here’s how.

Disclaimer

If you’re a new comer to Android phones, we wouldn’t advice that you are attempting this. Make sure that your phone has enough battery and it is coupled to the computer via USB at all times. When the process is interrupted at all for example power outages or PC restarts, chances are you\’ll risk bricking your phone and void any warranties. The chance of that happening is low, road directions of every do well, if you ever follow all the instructions on the tee.

RelatedDownload Official Android P Wallpapers for most Lively Images [Complete Gallery]

Step 1: Get ADB tools and invite developer options

Before proceeding, it is critical you have the all of the pre-requisite ADB. When you don’t, stop by the website link to download the know how. Second, we must make certain that your system is visible to your computer. After plugging with your device to your computer via USB cable, type \”adb devices\” in the built-in Terminal (MacOS/Linux) or Command Prompt (Windows) app. If you notice your device listed, you\’re ready go. In any other case, be certain your device has ADB debugging started up in Settings. To achieve that, visit settings>system>developer options>USB Debugging. Until you see Developer options, look at the \”About phone\” page and tap the Android build number repeatedly up until the device prompts you for that PIN and proceeds to unlock the variety of you.

Step 2: Unlock bootloader

To unlock your bootloader, see a Settings app, tap on the System option, and look at \”Developer options\” (until you see Developer options, drive to the \”About phone\” page and tap the Android build number once or twice). Guarantee that \”OEM unlocking\” is toggled on. Through your computer, open a terminal/command prompt and enter the \”adb reboot bootloader\” to consult with the device\’s bootloader and check out its status. In the event the bootloader on your own Pixel system is locked, make certain your set up is about the bootloader screen and sort \”fastboot oem unlock\” from the terminal. If that failed, you would need to make use of the \”fastboot flashing unlock_critical\” command.

Once the command is issued, make sure you go to a prompt in your device which could expect you to verify if you\’d like to unlock your bootloader. As you provides it the green signal, this device might be wiped completely. Hence, our recommendation is that you practice a backup of your details before proceeding with all the process.

Now, have the Android P Developer Preview 1 build for ones device from this level. Upon having downloaded the compressed file, extract it. Into the extracted compress file you will see a .zip file titled something for example \”taimen-ppp1.180208.014-factory-8e44f67a.zip\” (to your Pixel 2 XL, other devices names might vary). When you finally extract that file, you\’ll find the other tools you’ll require the work done, namely the bootloader, OS image, vendor image, and also a radio image.

RelatedDownload Android P Ringtones, Notification Sounds plus more

Run the script to setup Android P DP1

You can should boot within the bootloader to flash the factory image. Execute the command \”adb reboot bootloader\” again to acquire there. Or, you could begin on the device while holding the volume down and power keys simultaneously as well on the bootloader. Now point your command line to the file directory using the flash-all script. As an example, should the file is your C:/Downloads folder, you need to type “cd C:/Downloads/taimen-ppp1.180208.014-factory-8e44f67a). After you have successfully changed the directory, run your script in the computer.

  • On Unix/Mac, run \”./flash-all.sh\”
  • On Windows, run \”flash-all.bat\”

Now you\’ll want to observe the script running with your screen, which may take 5 to 10 minutes. If the image is installed, the script will automatically reboot your phone. The 1st boot normally takes some time to have got to wait about Half an hour. Anything above because of this you\’ve entered a boot loop. If that is so, well then, your going to have to flash many of the images manually. Make certain your system is within the proper bootloader state (you will be with the same screen because you were whenever you issued the “adb reboot bootloader” command), and then follow these instructions during the command prompt. The bootloader file name, radio file name and image file name may be found in the file that you just downloaded off of the website.

  1. fastboot flash bootloader <bootloader file name here>.img
  2. fastboot reboot-bootloader
  3. fastboot flash radio <radio file name here>.img
  4. fastboot reboot-bootloader
  5. fastboot flash -w update <image file name here>.zip
  6. fastboot reboot

After the device boots, you will need Android P DP1. If you’ve had thus the preview, you’re going to need to feel the same process again, even so time with stock Oreo images that you can get on Google’s website.

Source: 9to5google

Leave a Reply

Your email address will not be published.
Required fields are marked *